Seajet Pellerclean Propeller Foul Release Coating, Large Kit – 3000SP0440B

Description

Seajet Pellerclean is a foul release propeller coating for propellers, stern gear, shafts, rudders, and trim tabs. This foul release product is environmentally friendly, biocide free and provides long term protection against fouling in both fresh and saltwater environments. Seajet Pellerclean is designed to withstand up to an average speed of 40 knots. Suitable for DIY use as well as professional use.

Pellerclean consists of a two-part epoxy primer for improving adhesion and a silicon topcoat to provide an ultra-slippery surface for releasing any attached fouling. After application, any accumulated fouling normally washes off the non-stick, slippery surface when underway. For inactive boats, or those cruising below 5 knots, a quick wash or sponge off will remove any fouling and make the coating look like new again.

Applications:

• Propellers
• Shafts
• Struts
• Rudders
• Trim Tabs

Only Clear Coat – Underwater lightbulbs, transducers, plastic bow thrusters

Specifications:

Water Types: Salt water, Fresh water, Brackish water
Maximum Speed: Average 40 knots, maximum speed can be higher.
Application Method: Roller, Brush

Small Kit – 315 ml

Coverage:

• Quantity in small kit is sufficient to treat 7.5ft² (0.7m2). 

Large Kit – 1750 ml

Coverage:

• Quantity in big kit is sufficient to treat 40 ft² (3.88m2).