Description
The Dometic SeaStar Power Asist is an electronically controlled gear pump that is added into the hydraulic steering circuit between the helm and the steering cylinder. The system is comprised of two circuits: a hand operated manual system, which is the control element, and a hydraulic power pump, which is the working element. The manual system consists of a helm pump with internal relief and check valves, and a built in reservoir. The power system is an electronically controlled hydraulic pump that boosts the fluid being sent from the helm pump to the steering cylinder, resulting in much easier effort at the wheel.
Recommended for any boat that is 200 hp and above.
The power assist can be used with helms of any displacement but 1.4, 1.7 and 2.0 helm pumps ae recommended for optimal performance. Suitable for all front mount outboard cylinders, all SeaStar inboard and sterndrive cylinders except power steering cylinders.
** Do not use with Baystar steering cylinders. The unit can output enough pressure to damage the Baystar support rods.
Specifications:
- Operating Voltage: 12/24 (Automatically Detected)
- Working Pressure: 1000psi
- Maximum Pressure: 2000psi
- Relief Pressure: 2000psi
- Average Current Draw: ~3A
- Max Current Draw, 12V (24V): 50A (25A)
- Internal Fuse Rating: 40A x 2
- Recommended External Breaker 12V (24V): 50A (25A)
- Weight: 11.5lbs
- Ignition Harness Length: 25ft
- Power Harness Length: 15ft
- Power Harness Wire Gauge: 10awg
Reviews
There are no reviews yet.